All disclosures, notices and warranty conditions are being written on the EKWB website. Please read terms of use. Released on 21
th
of November, 2019; Revision 1
CONNECTING THE D-RGB LED STRIP
REQUIRED TOOLS:
scissors
Philips head screwdriver
Plug the 3-
pin connector from Water block’s D
-RGB LED light to the D-RGB_HEADER on the
motherboard. The LED will work if the pin layout on the header is as follows:
+5V G R B
.
Please ensure that the arrow indicated on the connector is plugged into
the +5V line as indicated on your motherboard.
Failure to do so will damage your motherboard or LED strip.
