This product is intended for installation by expert users only.
Please consult with a qualified technician. Improper installation
may result in damage to your equipment. EK Water Blocks
assumes no liability whatsoever, expressed or implied, for the use
of these products or their installation. The following instructions
are subject to change without notice. Please visit our website
at www.ekwb.com for updates. Before the installation of this
product, please read important notice, disclosure, and warranty
conditions printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Carefully read the manual before you start with the
installation process!
Remove your motherboard from the computer to ensure the
safest mounting method and prevent any possible damage to
your CPU and/or motherboard’s circuit board (PCB).
The EK fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with rubber
o-ring gaskets.
The use of high-quality market-proven corrosion inhibiting
coolants is always strongly recommended for any liquid
cooling system.
