- 6 -
STEP 2
Carefully attach the DDC pump and make sure that gasket (46x2.5) is
placed correctly. Sealing gasket is included in additional bag. Secure
the pump with four (4) M4 X 25 7984DIN screws (see sample photo).
Tighten the screws using enclosed 2.5mm Allen Key.
STEP 2
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector from the water block’s D-RGB LED light in
the D-RGB HEADER on the motherboard. The LED will work if the pin
layout on the header is as follows: +5V, Digital.
Please ensure that the arrow indicated on the connector is
plugged into the +5V line as indicated on your motherboard.
Failure to do so will damage your motherboard or LED strip.
D-RGB Header
RGB Header
M4 X 25
DIN7984 Screw
DDC
Pump
