Start tightening the block with enclosed screws (M2,5×8mm screws) from the GPU and
continue outwards. Please make sure that standoffs are well positioned and aligned with holes
(as shown on picture 10). After that, repeat same procedure on the other side.
11 × M2,5×8 mm
screws on each side
of the card.
Picture 10: Attaching the water block.
Step 5. After inserting and tightening all M2,5×8mm screws, remount plate at the VGA connectors (picture
4).
The final product with installed water block should look like this (without metal cover):
Step 6. Attach the liquid cooling tubes and connect the water-block(s) into the cooling circuit. The EK-
FC295GTX series are usually sold with high flow fittings. To ensure that the tubes are securely attached to
the barb fittings, please use hose clamps or an appropriate substitute. The use of an algaecide is always
recommended for any liquid cooling system.
VERY IMPORTANT NOTICE
While all efforts have been made to provide the most comprehensive tutorial possible, EKWB assumes no
liability expressed or implied for any consequential damage(s) occurring to your equipment as a result of
using EKWB cooling products, either due to errors or omissions on our part in the above instructions, or
due to failure or defect in the EKWB cooling products.
IMPORTANT DISCLOSURES:
While all efforts have been made to provide the most comprehensive tutorial possible, EKWB assumes no
liability expressed or implied for any damage(s) occurring to your components as a result of using EKWB
cooling products, either due to mistake or omission on our part in the above instructions, or due to failure
or defect in the EKWB cooling products.
WARRANTY:
Our products are warranted against defects in materials or workmanship for a period of 24 months
beginning from the date of delivery to the final user. During this period, products will be repaired or have
parts replaced at our discretion provided that: (I) the product is returned to the agent from whom it was
purchased; (II) the product has been purchased by an end user and has not used for commercial
purposes; (III) the product has not been misused, handled carelessly, or used in a manner other than in
accordance with the instructions provided describing its installation and proper use. This warranty does
not confer rights other than those expressly set out above and does not cover any claims for
consequential loss or damage. This warranty is offered as an extra benefit and does not affect your
statutory rights as a consumer. This warranty is voided if the product comes in contact with
aggressive UV additives.