All disclosures, notices and warranty conditions are being written on the EKWB website. Please read terms of use. Released on 29
th
of October, 2013. Revision 1.0
Страница 1: ...ate assembly screws should be removed There are 12 screws on the back of the graphics card see photo below Do not unplug the backplate power connector if you intend to re use the backplate with the EK FC780 Lightning water block see STEP 3a 1 cont Carefully detach metal heat spreader plate This step may require some force as the thermal pads may adhere the backplate firmly to the components on the...
Страница 2: ...CK W O the Backplate STEP 5 INSTALLATION OF FITTINGS AND TUBING Gently fasten M3x6 DIN7985 screws into pre installed standoffs There is no need to use excessive force on screws as you may over tighten them and make damage to standoff screw connection When reinserting MSI s GPU reactor be careful to precisely reattach PCB and not force it downwards as you may bend the connection pins Re insert the ...
Страница 3: ...All disclosures notices and warranty conditions are being written on the EKWB website Please read terms of use Released on 29 th of October 2013 Revision 1 0 ...
