- 11 -
CONNECTING THE D-RGB LED STRIP
D-RGB LED Connector
STEP 1
Connect the 3-pin D-RGB LED connector from the Water block’s LED
light into the D-RGB (Addressable) HEADER on the motherboard.
The LEDs will work if the pin layout on the header is as follows:
+5V,
Digital, Empty, Ground
.
Please ensure that the arrow indicated on the connector
is plugged into the +5V line, as indicated on your
motherboard. If you connect LEDs to the 12V RGB header,
it will damage them.
STEP 1
D-RGB Header
RGB Header