- 5 -
INSTALLING THE D-RGB LED STRIP
ATTACHING THE WIRE HARNESS
The EK-Loop D-RGB LED Magnetic strip contains 21 LEDs and
500 mm wire harness. The wire extenders (150 mm) allow you to
connect more LED strips to customize your PC LED lighting (shown
in the image).
The lighting can be attached with magnets or an adhesive strip and
connected via a 3-pin connector to supported 5V D-RGB headers
that are present on most modern motherboards.
Before connecting the LED strip with the motherboard, Wire harness
must be attached as shown in the image.
FEMALE HEADER
FEMALE HEADER
WIRE EXTENDER
LED STRIP
MALE HEADER
MALE HEADER
LED STRIP
WIRE HARNESS
