- 9 -
STEP 4
REMOVING THE TERMINAL METAL PLATE
The Metal plate attached on the Terminal is meant as a precaution,
to secure the two O-rings to prevent them from falling out of their
sockets during transport and handling. Before the installation of
the Active Backplate, this metal plate has to be removed. Unscrew
the three (3) M4 x 27 DIN7984 screws with the provided 2.5 mm
Allen Key shown on the picture. Keep the screws as they will be
needed in the upcoming step, unlike the metal plate which will not
be needed anymore.
STEP 4
M4 x 27 7984DIN SCREW
TERMINAL METAL PLATE
3090 Version
Thermal Pad G 1.0 mm
Thermal Pad G 1.5 mm
Thermal Pad G 2.0 mm
STEP 3
