Before you start using this product please follow these basic guidelines:
Please carefully read the manual before beginning with the
installation process!
The EK fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber o-ring gaskets.
The use of corrosion inhibiting coolants is always recommended
for any liquid cooling system. EKWB recommends any of the
EK-Cryofuel for worry-free usage.
There are many ways to install and configure the Reflection UNI 140, it
can be mounted to any 140mm fan position with standard 125x125mm
hole spacing the same as all EK 140mm fans and radiators. The threads
in this product are M4 with a maximum penetration of 8mm, use of
longer or improper screws may permanently damage the product!
