- POWER indicator: power indiction
- SEND indicator: Repeating indication, it will be on while transmitting signal.
8 gang DIP switch: At the bottom of the housing, each gang has on/off status. The
instruction are below:
1-gang: ON position means repeating signal of PT2262/1.2M. OFF position has no function.
2-gang: ON position means repeating signal of PT2262/2.2M or PT2240B/1.5M. OFF
position has no function.
3-gang: ON position means repeating signal of PT2262/3.3M. OFF position has no function.
4-gang: ON position means repeating signal of PT2262/4.7M. OFF position has no function.
5-gang: Adjust repeating time - OFF position mean 1.5s, ON position means 3~5s. (ON
position is stable position. OFF position is multiple transmitters mode)
6-gang: Transmitter selection - ON position just repeats the learned transmitters (If there
are more than 2 repeaters in same place, please use this function). OFF position can repeat
all the signal which match with it.
7-gang: When it learns transmitter, please switch to ON position, or not, turn to OFF
position.
8-gang: Testing function - Turn to ON position, the device always transmits the signal of
PT2262/1.2M. When it is working normally, turn to OFF position.
IV-Operation:
1) Install antenna: Please install the 2 antennas to the device when
first time use. (No order)
2) Deploy repeater: Please put the device in the middle between
transmitter and receiver and adjust well the distance according the
signal of transmitter. When it is ready, please also adjust the
receiver well.
