7-Instructions:
7.1-Preparation:
Before you start doing, safety protection must be done.
Ready for water.
Ready the power supply for the pump. (220 volts)
7.2-Installing the product:
1-Put the telescopic pole
②
into the brush
①
activities connector.
Release nut fixed. Adjust the length of the telescopic pole
,
and lock the nut.
2-Connected water supply hoses.
3-Start-up the pump.
4-Adjust the pump pressure adjustment handle, to adjust the water's pressure.
5-Spring (working angle) adjustment:
In order to allow the brush to fit the panels surface, the brush and the pole has a spring. For
different bevels and mounting heights, you can by changing the spring with different hardness to suit
the panel surface
7.3-Operation:
The operation of High Press Solar pole brush is very simple, almost no need of training.
By hand-held pole brush, open the switch of water, adjust the water flow rate, and then you can
cleaning. It is advisable to start cleaning from the top of the panel and operate from top to bottom.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
