eks Vision Plus 0300, Руководство пользователя

Страница: 6 / 92

6
b. Then the current memory user number (U1, U2 or U3) starts to
flash. Fig. 5. Press the
MEM
button to change the number.
Confirm your selection by pressing the START button. The current
user number can also be confirmed automatically after 5 seconds
with no operation.
c. After selecting the user number, the
most recent result will be displayed
with date and time. Fig. 6
If no memory is stored for the user
number the LCD will show Fig. 7
with current date and time if no
memory is stored for the user number.
d. Then the monitor starts by showing zero pressure. Fig. 8
e. The monitor inflates the cuff until
sufficient pressure has built up
for a measurement. The monitor
slowly releases air from the cuff
and makes the measurement. The
blood pressure and pulse rate is
displayed in the LCD. Fig. 9
Fig. 5
mmHg
Fig. 7
mmHg
Fig. 6
mmHg
Fig. 8
f. The blood pressure classification indicator will flash on the screen.
Fig. 8. The result will be automatically stored for the current user.
g. If there is an irregular heartbeat the irregular heartbeat symbol will
flash. Fig. 10 & Fig. 11
h. After measurement, the monitor will turn off automatically after 1
minute of no operation.
i. You can turn off the monitor at any time by pressing the
START
button.
mmHg
Fig. 9
Fig. 11
mmHg
Fig. 10