ekomia Levi, Быстрый старт, Страница: 15 / 16

The display reads HOT
The display reads E + an error code
Cause
Code / Description
The control unit is fitted with overheating
protection. Overheating has caused it to stop
the control unit.
00
01
02
12
13
24
25
48
60
62
36
37
61
55
67
81
Internal Error Channel 1
Internal Error Channel 2
Internal Error Channel 3
Defect Channel 1
Defect Channel 2
Overcurrent Motor M1
Overcurrent Motor M2
Overcurrent Motor Group 1
Collision protection
Overcurrent Control Unit
Plug detection in Motor socket M1
Plug detection in Motor socket M2
Actuator changed
Synchronization lost motor group 1
High voltage
Internal error
The control unit is fitted with overheating
protection. Overheating has caused it to
stop the control unit.
Unplug the power cord and contact
customer service
Unplug the control unit. Fix the external
short circuit.
OR
Plug in the correct motor to the motor socket
that shows the error. Start the control unit
again.
Remove jammed objects from the driving
area. Desk might be overloaded - Remove
load from desk.
Contact customer service.
Plug in the correct motor to the motor socket
that shows the error.
Reset all motors.
Remove load from desktop. Reset all motors.
If error occurs after reset again, contact
customer service.
Unplug the power cord and contact
customer service.
Make a manual reset. Unplug the power
cord and plug in again after a few seconds.
If this error occurs frequently, unplug the
power cord and contact customer service.
Remedy
Remedy
Error messages on the control display
EN