EKOM DK50 F, Руководство пользователя

Страница: 14 / 56

INSTRUCTIONS FOR USE
NP-DK50 F-19_07-2021 14 07/2021
11. SWITCHING THE COMPRESSOR ON
Fig.4
Switch on the compressor at the pressure switch (2) by turning the
knob (3) to position “I.”, The compressor sends pressurized air to the
air tank. As the compressed air is used, the pressure in the air nozzle
drops to a preset level, the compressor switches on and the air nozzle
files with compressed air. After reaching the cutoff pressure the
compressor turns off automatically and the cycle is repeated. Check
the value of switching-on and switching-off pressure on pressure
gauge. The values may be within a tolerance of

10%. Air pressure in
air chamber must not exceed maximal permitted operation pressure.
Never tamper with the pressure switch (2). Adjustments are not allowed. The pressure
switch (2) has been set by the manufacturer and further setting of switching on and off
pressure may be carried out only by a qualified expert trained by the manufacturer.
MAINTENANCE
12. MAINTENANCE SCHEDULE
Notice
The operating entity is obliged to ensure that all tests of the equipment are carried out repeatedly
at least once within every 24 months (EN 62353) or in intervals as specified by the applicable
national legal regulations. A report must be prepared on the results of the tests (e.g.: according to
EN 62353, Annex G), including the measurement methods used
.
Maintenance that must be
performed
Chapter Time interval Performed by
• Release condensate
At high air
humidity
For filter regulator a - operation
check
Pour out the condensate from a
bottle.
13.1
1 x week
1 x day
1 x week
1 x day
operating staff
operating staff
operating staff
operating staff
• Check safety valve
13.2
1 x year
qualified
technician
• Replacement of input filter
13.3
1 x every 2 years or after 4000
hours
qualified
technician
• Replacement of a filter bed in a
filter-regulator
13.4
1 x year operating staff
• Check tightness of joints
Overall examination of device
Service
documentation
1 x year qualified
technician
• Perform “Repeated Test”
according to EN 62353
12 1 x 2 years
qualified
technician