EKOM DK50 B, Руководство пользователя

Страница: 15 / 104

INSTALLATION
02/2021 15 NP-DK50 B-A-1_02-2021
10. PNEUMATIC CONNECTION
10.1. Connecting to the compressed air outlet

The pressure line (2) is attached to the
compressed air outlet (1) on the compressor
and connect the hose to the pneumatic hose
or directly to the supplied equipment.
Fig. 4: Connecting to the compressed air outlet
11. ELECTRICAL CONNECTION

The product is delivered with a cord equipped with a plug with earthing pin.

Keep the socket easily accessible to ensure that the device can be safely disconnected from the
mains.

Connection to the power distribution cabinet must be max.16 A
Risk of electric shock.
It is necessary to follow all local electro technical regulations. The mains voltage
and frequency must comply with the data stated on the device label.
Risk of fire and electric shock.
Electrical cord must not be broken.
Risk of fire and electric shock.
Electrical cable must not be in contact with hot compressor components.
11.1. Connecting a compressor not installed in a cabinet

Insert the mains plug into a rated mains socket.

The compressor is ready for operation.
11.2. Connecting a compressor installed in a cabinet

Route the mains plug through the opening in the rear wall of the cabinet for cabinet-mounted
compressors.

Connect the cabinet electrically to the compressor by inserting the provided power cord with
connector into an outlet.

Disconnect the cabinet electrically from the compressor by pulling the connector from the outlet
while the latch is released.
2
1