EKOM DK50-10 Series, Руководство пользователя

Страница: 12 / 120

PRODUCT DESRIPTION
NP-DK50-10-A-4_10-2019-MD 12 10/2019
8.3. Compressor cabinet
Fig. 3 The soundproof cabinet provides compact covering of the compressor, dampens noise
efficiently, providing sufficient exchange of cooling air. The fan under the compressor pump provides
cooling of the compressor. It is in operation at the same time with the compressor motor or after
switching on the temperat
ure switch at temperature above 40°C. After cooling the cabinet area
approximately under 32°C, the fan turns off automatically.
Risk of compressor overheating.
Make sure that there are no obstacles at the cooling air inlet into the cabinet
(around the bottom part of the cabinet) and at the hot air outlet on the top back
side of the cabinet.
If the compressor is placed on a soft floor, e.g. carpet, create space between the
base and the floor or the cabinet and the floor, e.g. underlay the footings with
hard pads to ensure sufficient cooling of the compressor.
The 8 - 10 bar compressor model is equipped with hours counter (Fig. 3).
Fig. 1: DK50-10Z - Compressor Description to Figures 1 - 3
1 Compressor pump
2 Air tank
3 Non-return valve
4 Pressure switch
5 Safety valve
6 Pressure gauge
7 Drain valve
8 Inlet filter
9 Dryer
10
–Circuit Magnetic holder
11 -
12 -
13 Solenoid valve
14 Dryer cooler
15 Filter
16 Solenoid valve of condensate
drain
17 Compressed air outlet
18 Circuit breaker switch
19 Condensate collection vessel
20 Magnetic holder
21 Fan
22 Switch
23 Hours counter
24 Socket
25 Cabinet fan