5) Use the M6 studs from underneath to level the stove
horizontally using an allen key.
See figure 5.1
As you tighten the stud, the two tab brackets on the plate
and stove respectively, will move away from each other
slightly, thus raising that side of the stove.
If necessary, washers can be used between the tabs to
maintain close larger gaps when leveling the stove.
6) Using the M8 bolts located at the bottom left and right
hand corners of the wall plate, the stove can be aligned
vertically. By loosening each bolt anti-clockwise, the bottom
of the stove will move away from the wall, thus providing
this vertical adjustment if necessary.
See figure 5.2
7) When fitting flue pipe using the top exit on the stove,
ensure that the weight of the flue system is self supported
(the flue system should not be supported by the stove
itself).
template pages please retain
page
18
Figure 5.1
Figure 5.2
