EKO KAC8Qi, Инструкция по эксплуатации

Страница: 9 / 12

9
BASIC OPERATION (CONT.)
Playing Music
• Select desired song or playlist on your phone, tablet or other Bluetooth enabled
audio device.
• Short press “Play/Pause” button to start or pause the music.
• Short press the “Pre” button or “Next” button to go to previous or next song.
• Short or long press the “V +/-” button to adjust the volume
Clock
•
In clock mode, (standby mode, without listening to radio)
long press
“Time Setting” (located at back of Radio)
button and the
hour number will be flash, short press
“MEM-/Pre”
or
“MEM+/Next”
button to adjust hours,
short press
“Time Setting”
button again, the minute number will be flash, short press
“MEM-/Pre”
or
“MEM+/Next”
button to adjust minutes, short press
“Time Setting”
button
again to save time setting and exit.
•
When power on, the default time show as
“12:08”
PM, short press the
“Time Setting”
button to switch 12H/24H time mode.
Alarm Mode
• In clock mode, (standby mode, without listening to radio)
short press twice “Alarm Clock1” button to turn on/off Alarm clock 1.
• When the Alarm 1 indicator lighting, long press “Alarm Clock1” button, the hour number will
be flashing, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the hour.
• Once finish the hour setting, short press “Alarm Clock1” button, the minute number will be
flashing, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the minute.
• Once finish the minute setting, Short press “Alarm Clock1” button, panel display “BUZ” ,
short press “MEM-/Pre” button or “MEM+/Next” to select “RAD” FM radio or “BUZ” default
ring as alarm tone.
• Once finish the alarm tone setting, short press “Alarm Clock1” button to enter volume
adjustment, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the volume
you need, short press “Alarm Clock1” button to save all settings and exit.
• To stop the alarm clock1 when it rings, short press the “Alarm Clock1” button and it will
stop and ring again in next day at the same time.