EKKO EP18D Series, Руководство пользователя

Страница: 9 / 28

6
5.Operating principle
5.1Running system
It is battery provides energy storage and the frequency conversion system converts direct current
to alternating current that make the truck walk. Walking speed is achieved by variable frequency
control of motor speed and controlled by the accelerator. Gear box in the factory has been posited
enough gear lubricating oil. And please change the gear lubricating oil every 1000 hours under
normal circumstances.
Gear box in the factory has been posited enough gear lubricating oil. And please change the gear
lubricating oil every 1000 hours under normal circumstances.
If you hear abnormal sound from gear box when using, please stop and check immediately. If
there are bearing failure or some problem in gear, please replace and repair them.
5.2 Steering system
The operating handle drives the rotation direction sensor which can send out the turn signals that
makes the truck turn around.
5.3 Braking system
5.3.1Braking performance depends on road conditions and vehicle load
conditions.
The brake function can be activated by the following ways
：

Turn the travel switch (2) to "0" position or release the switch to make truck brake
until it stops.

With the driving switch (2) moving directly from one driving direction to the
opposite direction, the vehicle regenerates the brake until it begins to move in the
opposite direction.