11
8.Operating Instruction
Before operation, please familiarize yourself with the functions of the switches
and buttons on the dashboard.
8.1 Start, run and parking:
○
1 Insert the key into the key switch, turn to the right, the emergency power
safety switch clockwise reset, gently open the control circuit.
○
2 The fork rises from the ground about 10 cm.
○
3 Slowly turn on the travel switch until the required speed.
○
4 In the process of operation, forklift exception occurs fault, need to quickly
cut off power supply, please press the red emergency power switch.
○
5 When the forklift is turning, you should reduce the speed and, if possible,
try not to make sharp turns.
○
6 Forklift truck carrying gradeability is 10%, so the uphill slope need to
understand the situation, when climbing the forklift must accelerator pedal
pressed down as far as possible, the maximum climbing force can be achieved.
○
7 When the stacker stops , Lowered the fork to the lowest position, press
the safety switch, and pull out the key.
8.2The using of emergency power safety switch
If the forklift is out of control during driving, or if it is smoked or burnt
during use, please press the emergency switch on the forklift seat cover and the
power will be cut off. Find out the cause and clear the fault before you can open it.
The method of opening is as follows: the emergency power-off safety switch is
rotated in the direction indicated by the arrow above the button, and the opening
is completed.
