background image

 

- 10 - 

- 10 -
 

 
 
 
 
 
 
 
 
 
 
 
 

 
 

5.1 Parking 

Not recommended to stop on a slope. 
This car is equipped with an electromagnetic fault protection parking and parking brake. 
However, please always completely lower the fork at all times. Turn key counterclockwise rotation, 
then remove the key. 

5.2 Load Curve 

Load curve shows a given load center C [mm] and horizontal load capacity of the largest load Q [kg] 
vehicle corresponding lifting height is H [mm]. 
The white mark on the door frame representation can reach ascension range. 
For example: a cargo gravity center distance of C is 24”, the maximum lifting height H 
119in, the maximum load capacity of Q to 1540lbs.

     

5.3 Lifting Loads     

   

Do not overload. The maximum load capacity of this car is 1540lbs at max height. 
Only increase the load capacity allowed by the load curve. 
When traveling, lower the fork to 11.8in to reduce to a car on the leg, and press the lift button (Figure 
1, 11) until you reach your expectations lifting height. 

5.4 Lowering Loads

 

Always  lower  the  loads  slowly  and  carefully  without  any  shifting  or  turning.  Carefully  press  the 
down button, then carefully pull away from the goods. 

5.5 Traveling 

Always travel with slower speeds with loads and when going up ramps have the load facing forward.   
Travel with caution and awareness of your surroundings.   
Always lower your load to a minimum when traveling.   

Содержание EB12EA Series


















Отзывы: