Applicatio Manual
Universal Interface 4 DIN/NTC EK- CG2-TP
Revisione 1.0.0 - Aggiornato: 04/09/2017
© SBS S.p.A.
– Tutti i diritti riservati
MAEKCG2TP_EN
Pag. 50
9.4 Temperature control
The
Temperature control
folder includes the following secondary folders:
•
Settings
•
Heating
•
Cooling
•
Ventilation
•
Scenes
The
Cooling
and
Ventilation
secondary folders appear only if in the
Settings
folder the parameter Thermostat
function is set to the value
both heating and cooling
or
cooling
.
The
Scenes
secondary folder appears only if in the
Settings
secondary folder the parameter Scenes is set to the
value
enabled
.
9.4.1Settings
The
Settings
folder includes the following parameters:
•
Thermostat function
•
Command Communication Object
•
Heating
– cooling switchover
•
Setpoint Cyclic sending interval
•
Max manual temperature change
•
Saving timeout (manual change)
•
End of manual operation
•
Max setpoint temperature change
•
Scenes
•
Valve protection function
•
Frequency
•
Time interval
9.4.1.1
Parameter and communication object tables
Parameter name
Conditions
Values
Thermostat function
heating
cooling
both heating and cooling
Command Communication Object
Thermostat function = both heating
and cooling
separated
/ unique
Heating
–cooling switch over
Thermostat function = both heating
and cooling
manual
from bus
automatic
Heating-cooling cyclic sending interval
Thermostat function = both heating
and cooling
no sending
[other values in the range 30 s … 120 min]
Parameter name
Conditions
Values