4
Other information
• The instruction sheet must be delivered to the end
customer with the project documentation
• For further information on the product, please contact
the ekinex
®
technical support at the e-mail address:
[email protected] or visit the website www.ekinex.
com
• Each ekinex
®
device has a unique serial number on
the label. The serial number can be used by installers
or system integrators for documentation purposes and
has to be added in each communication addressed to
the EKINEX technical support in case of malfunctio
-
ning of the device
• KNX
®
ed ETS
®
are registered trademarks of KNX
Association cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes
to this documentation without notice.
Warnings
•
Installation, electrical connection, configuration and
commissioning of the device can only be carried out
by qualified personnel in compliance with the appli
-
cable technical standards and laws of the respective
countries
•
Opening the housing of the device causes the imme
-
diate end of the warranty period
•
In case of tampering, the compliance with the essen
-
tial requirements of the applicable directives, for which
the device has been certified, is no longer guaranteed
• ekinex
®
KNX defective devices must be returned to the
manufacturer at the following address: EKINEX S.p.A.
Via Novara 37, I-28010 Vaprio d’Agogna (NO) Italy
Warning!
Incorrect disposal of this product may
cause serious damage to the environment and hu-
man health. Please be informed about the correct
disposal procedures for waste collecting and pro-
cessing provided by local authorities.
!
