EKF PCZ-NVM, Техническая информация

Страница: 14 / 39

Technical Information • PCZ-NVM • CPU Expansion Side Card
Summary of Connectors
Not all of the connectors or other elements listed below may be present or functional on your
actual PCZ-NVM board. Assembly of these connectors is highly custom specific. Discuss your needs
(target application) with EKF before ordering, for an optimum CPU & side card configuration.
Front Panel Connectors
COM-A D-Sub 9-pin male connector, EIA 232 signal level
COM-B D-Sub 9-pin male connector, EIA 232 signal level
DP3 DisplayPort video output connector, latching type, standard mount
USB3 USB 3.0 receptacle Type-A (USB 3.1 Gen1 5Gbps)
On-Board Connectors
FIO Option, 12HP front panel I/O mezzanine card connector, suitable for the C32-FIO module (UART
ports TTL level, USB)
M1 M.2 module socket (M-key), suitable for an on-board M.2 style NVMe SSD storage module, PCIe®
Gen3 x4 support, 2230-22110 module size
M2 M.2 module socket (M-key), suitable for an on-board M.2 style NVMe SSD storage module, PCIe®
Gen3 x2 support, 2230-22110 module size
Inter-Board Connectors (CPU Carrier)
HSE1 High speed mezzanine connector, available from bottom of the PCZ-NVM PCB, mating with the
corresponding connector on the CPU carrier board, comprising of:
<
PCI Express® Gen3, configured for single link x4
<
1 x USB3
< 1 x USB2
HSE2 High speed mezzanine connector, available from bottom of the PCZ-NVM PCB, mating with the
corresponding connector on the CPU carrier board, comprising of:
<
PCI Express® Gen3, configured as two links x2
< 1 x DisplayPort
© EKF -14- ekf.com