eKey home Series, Руководство по эксплуатации

Страница: 14 / 23

en│13
This function defines the brightness of the status LEDs on the finger
scanner when in idle mode.
The LED brightness is set via the main menu. To get to the main menu,
enter the security code.
See Entering the security code, page 10.
The system displays the main menu.
Step Action Description Display
1st
Press < or > until LE is displayed.
2nd
Press OK .
3rd
Press < or > to select the desired LED
brightness. E.g. 2 .
0 = LED off
1 = LED dimmed
2 = LED on
4th
Press OK .
The LED brightness is saved. The system is in normal mode.
The digital input of the control panel enables the following functions:
Exit button
The input functions as a remote opener for relay 1. In this case, the relay
switches the defined relay switching time or for as long as the input is
enabled (e.g. request-to-exit button, permanent opening).
Feedback
The LEDs on the finger scanner indicate for 30 seconds the digital input
status when an authorized finger is swiped over the sensor. If the digital
input is enabled, the LEDs light up red. If the digital input is disabled, the
LEDs light up green. A digital input status change within these 30 seconds
is also indicated by the LEDs. This enables you to see that the alarm
system is still appropriately sensitive, for example.
Blocking R1
Relay 1 cannot be switched if the input is enabled (e.g. entrance blocking
while the alarm system is enabled). The LEDs on the finger scanner
indicate for 30 seconds the digital input status when an authorized finger
is swiped over the sensor while the input is enabled. The LEDs light up red
for 30 seconds.
The digital input is set via the main menu. To get to the main menu, enter
the security code.
See Entering the security code, page 10.
Setting the
LED brightness
Setting the
digital input
All manuals and user guides at all-guides.com