eKey home KNX RS-485, Руководство по эксплуатации, Страница: 13 / 20

12 │ en
Step Action Description Display
12.
No action
required Repeat steps 7 to 11 for
all additional ekey events.
KNX settings
CV KNX available: Y
E01: HOME SCENARIO
E02: CHILDREN
E03: F02
E04: F03
13.
Press ESC twice.
Enroll user
Delete user
Fair mode
Settings
Reset
The ekey home control panel DRM is now ready for operation with the
ekey converter KNX RS-485 .
NOTICE
If you do not wish to give the ekey Events 1-10 (E01-E10) descriptive
names, then you can skip steps 7 to 12. Assigning descriptive names is
helpful when carrying out further configurations of the system.
Configuring KNX
ekey events 1-10 are assigned to a finger via the SAVE USER process
(see ekey home CP DRM operating instructions, section Saving users). In
the storing process, the ekey event is assigned before the switching relay.
See ekey home CP DRM operating instructions, section “ Saving users ” .
Select SAVE USER in the menu. Carry out all steps up to FINGER
SELECTION .