eKey home CP micro 1, Руководство по эксплуатации

Страница: 26 / 64

en │ 25
The option is available to store a user coupling code. This can be passed
on to a person of your choosing, who can then use it to perform the
following actions with their mobile device:
□ Open a door
□ Enable/disable the app security code
□ Change the app security code
□ Reset the coupling between the finger scanner and their mobile
device.
Step Instruction
1st Start the ekey home app .
2nd Select ADMINISTRATION .
3rd Select CHANGE SECURITY CODES .
4th Enter the required user coupling code in the corresponding
field.
5th Confirm by selecting Change (Android) or Done (iOS).
The user coupling code was stored.
If you have forgotten the app security code, you can use the app to reset
the coupling between the Bluetooth finger scanner and the mobile device.
When this reset is performed, the app security code is also reset to the
default value of
9999 .
Step Instruction
1st Start the ekey home app .
2nd Enter an incorrect app security code.
3rd Confirm by selecting Next .
4th Select RESET COUPLING .
5th Confirm that you wish to carry out the reset by selecting
Continue .
The coupling between the Bluetooth finger scanner and the mobile device
has been reset and the app security code set to
9999 .
You can now recouple the Bluetooth finger scanner.
See Coupling additional mobile devices, page 23.
Storing the
user coupling
code
Resetting the
app security
code