eKey ekey lock, Руководство по эксплуатации

Страница: 20 / 22

en │ 19
Battery replacement
You do not have to remove the module knob from the cylinder in order to
replace the battery.
Step Figure Description
1st Slide the battery replacement clamp over
the module knob.
2nd Press down on the two locking bolts on the
module knob with the battery replacement
clamp.
3rd
Remove the protective cap. A little force
may need to be applied in order to remove
the cap.
4th Now replace the batteries. Check that the
polarity is correct. A short acoustic signal
sounds as soon as the 2nd battery has
been inserted.
5th Slide the protective cap over the module
knob.
6th Press the locking bolts into place.
7th Position the protective cap. Both locking
bolts must engage in the bore hole on the
protective cap.
The process to replace the batteries is complete.