C:
RECORDING FINGERPRINTS-
When you record a user´s fingerprints, you:
Set the user name
Select the finger to be used (you can save up to 10 fingers / user; but you cannot save more than
99 fingers in the whole system)
Record the finger’s reference template
DISPLA Y
Enter security
code
DISPLA Y
KEY
STROKE
DISPLA Y
Select user num ber
KEY
STROKE
DISPLA Y
Set user name
KEY
STROKE
DISPLA Y
Select finger
KEY
STROKE
DISPLA Y
Select re lay
KEY
STROKE
DISPLA Y
SWIPE THE
FINGER OVER
THE SENSOR
DISPLA Y
3 x green …Finger
accepted
DISPLA Y
See
B:
Select user
number
Strike
to scroll up
to the user name and
set the user name
(digit 1 to 9)
Select finger
Select relay
The numbers mean that these fingers have already
been enrolled for the corresponding relay:
1 … Relay 1
2 … Relay 2 (only for
ekey home CP DRM
2
)
3 … double relay (only for
ekey home CP DRM
2
)
D
O
N
E
START
The finger has been
enrolled and in this
example it has been
assigned to relay 2!
Now you can enroll
additional fingers or
jump back to the main
menu by striking the
key.
.
Repeat until complete user
name is set
(9 digits)
only for
ekey home CP DRM
2
It has not yet been possible to capture 3 fingers, or the
captured finger is of poor quality.
The finger image is of very poor quality. Try it once
again, read Chapter 5
The quality of the finger image is good, but not excellent.
You may either exit enrollment by pressing
the OK button
or try once more.
Although a finger has been swiped over the finger
scanner, the device has not discerned any finger swipe.
Read chapter 5
At least
3
times
G:
RESETTING TO FACTORY SETTINGS -
WARNING! All the fingers which have been enrolled will be deleted!
DISPLA Y
Enter sec urity
code
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
See
B:
Select the menu item
„Reset“
H:
PLEASE CHECK THE USER´S GUIDE ON OUR HOMEPAGE
www.ekey.net
FOR ADDITIONAL MENU ITEMS.
B:
ENTERING THE SECURITY CODE –
The security code allows you to avoid system manipulations by unauthorized people. The factory default setting for this
code is „
99
“. Change this code as soon as you have started up the system, in order to be protected against manipulations.
F:
CHANGING THE SECURITY
CODE
explains how to change the code:
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
SECURITY CODE D igit 1
SECURITY CODE D igit 2
You now are in the main
menu and may change
system settings as you wish!
DONE
START
Should you have entered 3 times in a row
a wrong security code, then your system
will be locked for half an hour!
D:
DEFINING THE RELAY SWITCHING TIMES-
The switching time of each relay can be set from
1
sec to
99
sec. If you select
0
sec, then the relay operates in
bistable mode
(= the relay changes its switch status, which then remains as such, until the next switching). The default factory setting is
3
sec.
DISPLA Y
Enter sec urity
code
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
See
B:
Select the menu item
„Set relay time“
Set relay 1 time
Set relay 2 time
(only for
ekey home CP DRM
2
)
ZnR
=
Status after Reset or Power
failure
. Only if the relay switching time
has been set to 00.0 (b istable mode)
-
…the relay remains off after reset or
power failure.
I
… the relay resumes the status it had
before the reset or power failure.
START
D
O
N
E
E:
DELETING USERS-
It is only possible to delete users.
It is not possible to delete individual fingers of one same user!
DISPLA Y
Enter sec urity
code
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
See
B:
Select the menu
item „Delete user“
Select the user to
be deleted
This user´s fingers will all be
deleted! The user name is set back
to the factory settings.
START
D
O
N
E
START
DONE
F:
CHANGING THE SECURITY CODE-
Change the security code. Factory setting is „
99
“.
DISPLA Y
Enter sec urity
code
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
See
B:
Select the menu item
„Security code“
Enter the first digit of
the new code
Enter the second
digit of the new code
START
D
O
N
E
Your
ekey home
system
has now been reset to
the factory settings. All
the fingers have been
deleted! For a new
start-up go back to
„
A:
INITIALIZING
THE DEVICES
“
A:
INITIALIZING THE DEVICES-
The devices have to be initialized both for a new installation and when one of the devices has been replaced.
Only after this has been done can fingerprints be saved. Please follow the steps below:
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y
KEY
STROKE
DISPLA Y FOR 2
SEC
DISPLA Y
OR
Select language
If you have only replaced the
ekey home CP DRM
, and you are using an ekey home
finger scanner on which fingers have already been saved (e.g. replacement due to a
defective CP), you can keep
all the saved fingers
by swiping a saved finger over the
sensor. If you strike the
ESC key,
then all the fingers will be
deleted!
The devices have now
been initialized. You
may start enrolling
users->
see
B:
D
O
N
E
START
