Ekars EPA-2403, Руководство по эксплуатации

Страница: 6 / 12

Rear Panel Controls
5
1. AC INLET
The terminal is connected to AC Input cord.
2. AC FUSE (AC 5A/ 250V)
Replace it with the same type fuse when it is blown out.
3. DC 24V INPUT TERMINALS
These terminals are for connecting DC power supply of battery.
Connect red colored terminal to positive lead of battery
and black colored one to negative lead of battery.
4. SPEAKER OUTPUT TERMINALS
These terminals are for connection of speaker lines to deliver power output
to speakers. Impedance (Voltages) of 4ohm, 8ohm, 70V and 100V
is provided for convenience.
5. HIGH-PASS FILTER SWITCH
This switch is for activating the High-pass Filter circuit to protect speaker
from excessive low frequency power demands.
The -3dB frequency of the High-pass filter is 400Hz.
6. INPUT LEVEL CONTROL
This is used for volume level of Input.
7. SIGNAL INPUT JACK ( for 1/4 Phone Jack)
This input jack is for balanced input signal.
8. SIGNAL INPUT JACK (for XLR Receptacles Jack)
This input jack is for balanced input signal.
4 Ω 8 Ω 7 0 V 1 0 0 V
4 0 V 5 7 V 1 2 Ω 2 5 Ω
AC INPUT
AC FUSE
F5AL 250V
OUTPUT RMS 400W OUTPUT RMS 400W
COM 4
Ω
(40V)
8
Ω
(56.6V) (12.3 )
Ω
(25 )
Ω
70V 100V
ON OFF
400Hz -3dB
HPF
INPUT LEVEL
BALANCED INPUT : 0dBm (775mV) / 20K
Ω
BALANCED INPUT : 0dBm (775mV) / 20K
Ω
MIN MAX
DC INPUT
24V
50/60Hz. 1KW
220V-240V
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DON'T EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
WA R N I N G
:
TO REDUCE THE RISK OF FIRE TO REDUCE THE RISK OF FIRE
REPLACE ONLY WITH SAME TYPE FUSE.
CAUTION
:
CAUTION CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MADE IN KOREA MADE IN KOREA
PUBLIC ADDRESS PUBLIC ADDRESS
www.ekars.co.kr
POWER AMPLIFIER POWER AMPLIFIER
OUTPUT POWER 400W RMS OUTPUT POWER 400W RMS
MODEL NO : EPA-2403 MODEL NO : EPA-2403
SN
LINK LINK
1 2 3
4 5 6 7 8