EN
Time change (summer time): enable/disable the time change (only if [GMT use] is
configured to [user-defined]).
Date: set the date (only if [GMT Use] is configured to [Off]).
Time: set the time (only if [GMT Use] is configured to [Off]).
Timer Settings:
Timer mode: set the time period: once, daily, weekly, monthly, disable timer function.
Timer service: when configuring in [PVR], the device switch to the channel on the
predefined date and time and start recording the programme; when configuring in
[Channel], the device will switch to the preset channel on the set date and time.
Alarm clock channel: set the channel.
Alarm clock date: set the date. Alarm time: set the start time.
Duration: set the display duration (or recordings if [Timer Service] is configured in [PVR]
of a channel).
Loop-through in standby mode:
when enabled, the device in standby mode will share the antenna signal with another
receiver.
Parental control:
Reminder: the factory default password is 0000.
Lock menu:
when enabled, access to the channel change and the search menu is protected by a
password.
New password: enter a new password.
Password confirmation: confirm the new password.
OSD Configuration:
-OSD timeout: select the duration of the OSD display from 1 to 10 seconds.
-OSD clarity: set the clarity of the OSD to Off or from 10% to 40%.
Favourites: to change the name of the favourite channels list.
Antenna power:
Set to ON when having an active antenna without a power adapter.
Set to OFF when having a passive antenna with power adapter.
TOOLS:
Auto standby mode:
set how long it would take for the device to automatically enter into standby mode (1
hour, 2 hours, 3 hours, 4 hours or 5 hours).
Auto standby mode time: