- 10 -
Thermal Grease
STEP 2
STEP 2
Once cut to size, thermal pads should be placed on the PCB, as
illustrated in the image. EK made sure to provide you with more
than an adequate quantity of thermal pads to complete this Step.
STEP 1
Apply the enclosed EK-TIM Ectotherm thermal grease (thermal
compound) on the CPU heat spreader – IHS – as shown in the
image. The layer of the thermal compound must be thin and even
over the entire surface of the IHS.
The excessive or uneven application of thermal grease
may lead to poor performance!
STEP 1
APPLYING THERMAL COMPOUND
For this Step, you will need:
Thermal Pad F 1.0mm
