- 10 -
STEP 3
M2.5 x 6 AX1 SCREW
M2.5 x 6 AX1
SCREW
M2.5 NUT
STEP 3
ATTACHING THE I/O BRACKET
Use two (2) M2.5 X 6 AX1 screws and one (1) M2.5 Nut to secure the
I/O bracket to the PCB.
For this Step, you will need:
For this Step, you will need:
M 2.5 PVC Washer
(16 pcs)
M 2.5 Nut
(1 pc)
M2.5 x 4 AX1
(16 pcs)
M2.5 x 6 AX1
(2 pcs)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 mm
6 mm
STEP 2
M2.5 x 4 AX1 SCREW
M2.5 PVC WASHER
STEP 2
ATTACHING THE BLOCK TO THE GRAPHICS CARD
Use sixteen (16) M2.5 X 4 AX1 screws and M2.5 PVC washers.
Tighten the screws evenly using the Phillips head screwdriver.
EK recommends you start tightening the screws around the GPU
core first and then continuing outward to prevent damaging the
GPU. Always use a plastic washer under each screw!
