- 13 -
IMPORTANT:
Use this opening
as the Inlet Port!
INSTALLING FITTINGS AND TUBING
For the EK-Quantum Momentum ROG Maximus XIII Hero D-RGB
monoblock to operate properly, the G1/4 port nearest to the right
side of the water block (and the EK badge)
MUST BE USED AS
THE INLET PORT
.
TUBING
EK-FITTING
CONNECTING THE D-RGB LED STRIP
STEP 1
D-RGB HEADER
RGB HEADER
Plug the 3-pin connector from the monoblock’s D-RGB LED light to
the D-RGB Header on the motherboard. The LEDs will work if the pin
layout on the header is as follows:
+5V, Data, Empty, Ground
.
