This product is intended for installation by expert users only. Please
consult with a qualified technician since improper installation may
result in damage to equipment. EK assumes no liability whatsoever,
expressed or implied, for the use of this product, nor its installation.
The following instructions are subject to change without notice.
Please visit our website at www.ekwb.com for updates. Before
installing this product, please read the important notice, disclosure,
and warranty stipulation printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Carefully read the manual before beginning with the
installation process!
Remove your motherboard from the chassis for the safest
mounting process and to prevent damaging your CPU or
motherboard’s circuit board (PCB).
EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured with the
rubber O-ring gaskets.
The use of quality market-proven corrosion-inhibiting
coolants is always strongly recommended for any liquid
cooling system.
Do not use pure distilled water as a cooling liquid! For best
results, EK recommends the use of EK-CryoFuel Coolants.
