- 9 -
For this step, you will need:
Phillips Head Screwdriver
STEP 4
STEP 3
Remove all the remaining stock thermal pads from the motherboard.
STEP 4
Turn the Heatsink upside down. Unscrew four (4) M2x2.5 screws
from I/O Light screen. To detach the I/O Bracket 1 unscrew two (2)
M2x4 screws. Store all the screws and I/O Bracket 1 for later use.
For this step, you will need:
Phillips Head Screwdriver
STEP 5
Turn the Heatsink upside down again and pull the I/O Light screen
straight up. Unscrew two (2) M2x4 Screws and detach the I/O
Bracket 2. Store all the screws, I/O Light screen and I/O Bracket 2
for later use.
STEP 5
SCREW
M2x4
SCREW
M2x4
HEATSINK
I/O BRACKET 1
I/O BRACKET 2
I/O BRACKET 2
I/O HEATSPREADER
SCREW M2x2.5
I/O LIGHT
SCREEN
