1
2. Installation
-. Environmental Settings
The monitor may need to be set in some environment. If you install it for the first time or
change environment, set the monitor.
•
Set the signal corresponding to make a connection for non monochrome signal only
specifications.
•
Set the monitor orientation.
If the monitor is in portrait position and make a connection for monochrome signal only
specifications, no setting is required.
NOTE
•
Refer to the manual of the graphics board.
•
These environment described below can be set regardless of whether or not the computer
is running.
How to set
1
Turn off the monitor power by touching the power switch on the
control panel.
2
Touch the power switch while touching the mode switch on the
control panel.
3
The <Signal Selection> menu appears.
Select (or check) the signal with directing
switches corresponding to the kind of
graphics board or the image data to be
displayed and touch the enter switch.
4
Next the <Orientation> menu appears.
Select (or check) the orientation with
directing switches according to your
monitor orientation and touch the enter
switch.
Mode Switch
Power Switch
Signal Selection Menu
Orientation Menu
