Eizo LS-H32-D, Руководство пользователя, Страница: 7 / 9

English
How to attach the monitor: LS-H63-D
1.
Remove the original tilt stand.
Lay the LCD monitor down on the soft cloth or cushion and then remove the stand.
(Refer to “Attaching An Arm Stand” section in the monitor’s user’s manual in
details.) When reattaching the original tilt stand, please use the same screws and
tighten them securely.
2.
Attach the LCD monitor to the stand.
Place the shield plate to be straight with the monitor.
3.
Attach the covers to the shield plate.
Hold the center of the stand mounting cover and slide them rightward or leftward
to attach them.
4.
Plug the power cord and signal cable into the connectors at rear of
monitor.
After plugging, lead the power cord and signal cable into the cable holder at rear of
the monitors.
NOTE
x The cable holder enables to hold 2 signal cables by EIZO, a
power cord, 5 USB cables and 2 stereo mini jack cables.
x The cables are recommended to lead with slight sag for the
smooth motion of the stand.
Sheild Plate
Mounting screws (Enclosed)
Covers (Enclosed)
Cable Holder
7