51
Chapter 8 Reference
Detaching procedure
1.
Shut the bottom of the cable holder.
2.
While holding the shut section, lift the cable holder upward to remove it from
the Stand base.
8-4. Making Use of USB (Universal Serial Bus)
This product is equipped with a USB hub. Connected to a PC compatible with USB, this monitor functions
as a USB hub allowing connection to peripheral USB devices.
Note
•
This product supports USB 3.0. When connecting to peripheral devices that support USB 3.0, high-speed data
communication is possible.
●
Required System Environment
• A PC equipped with a USB port.
•
Windows 8.1 / Windows 8 / Windows 7 / Windows Vista or Mac OS X 10.2 or later and Mac OS 9.2.2
•
EIZO USB cable (UU200SS (USB 3.0))
Attention
• This monitor may fail to work depending on the PC, OS or peripheral devices to be used. For the USB
compatibility of peripheral devices, contact their manufacturers.
• When the monitor is in the power saving mode, devices connected to the USB downstream port will still
work. Therefore, the power consumption of the monitor varies with the connected devices even in the power
saving mode.
• When the main power switch is turned off, devices connected to USB downstream ports do not work.
●
Connection procedure (Setup of USB function)
1.
Connect the monitor first to a PC using the signal cable, and run the PC.
2. Using the USB cable, connect the downstream port of a PC compatible with USB and the
monitor’s upstream port.
The USB hub function is set up automatically upon connection of the USB cable.
3.
Connect the peripheral USB device to the USB downstream port of the monitor.
