English
5. ATTACHING A STAND
29
5. ATTACHING A STAND
The LCD monitor can be used with other stand by removing the tilt stand and attaching
the stand to the LCD monitor.
NOTE
•
When attaching an arm or stand, follow the instructions of their user’s manual.
•
When using another manufacturer’s arm or stand, confirm the following in advance
and select one conforming to the VESA standard.
-
Clearance between the screw holes: 100 mm x 100 mm
-
Thickness of plate: 2.6 mm
-
Strong enough to support weight of the monitor unit (except the stand) and
attachments such as cables.
•
Attach an arm or stand to meet the following tilt angles of the monitor.
-
Up 45 degrees, down 0 degrees (Within operating range)
•
Please connect cables after attaching a stand.
Setup Procedure
1.
Lay the LCD monitor down. Do not scratch the panel.
2.
Remove the tilt stand by loosening the screws (2 pcs of M4 x 10
mm).
3.
Attach a stand to the LCD monitor securely.
4 Mounting Screws (enclosed): M4 x 12 mm
stand
