Eizo FLEXSCAN HD2441W - SETUP Скачать руководство пользователя страница 26

Страница: 26 / 52

Chapter 3 Settings and Adjustment

3-5 PinP (Picture in Picture) Display

●

To display the PC input signal screen (Main Window)
and the VIDEO input signal screen (Sub-Window)
simultaneously [PinP]

When a PC and an AV equipment are connected to the monitor, the monitor

allows you to display both screen images on the Main Window and the Sub-

Window.

PC (PC input
signal screen)

AV equipment
(VIDEO input
signal screen)

Main Window
(PC input
signal screen)

Sub-Window
(VIDEO input
signal screen)

[Procedure]

(1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar.

(2) Choose the <PinP> icon in the <PinP Settings> menu and tap the slide bar.

The <PinP> menu appears.

(3) Trace the slide bar left and right to select “On” and tap the slide bar.

The setting is completed.

■

To return to the normal display mode (Single display) from PinP

display mode

[Procedure]

(1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar.

(2) Choose the <PinP> icon in the <PinP Settings> menu and tap the slide bar.

The <PinP> menu appears.

(3) Trace the slide bar left and right to select “Off” and tap the slide bar.

The PinP display mode is canceled.

NOTE

• When the <PinP> is set to “On”, the

monitor displays the images for the
PC input signal currently selected and
the VIDEO input signal previously
selected in dual screen.

• In PinP display mode, both sounds for

Main Window and Sub-Window are
heard simultaneously.
The sound level of the Sub-Window
effects on that of the Main Window.

• Touching

for approx. two

seconds enables you to change the
display mode to PinP mode.

• Touching

and using the Input

Selection menu enables you to change
the display mode to PinP mode. (Refer
to page 15.)

Attention

• When selecting the VIDEO input

signal, the PinP function is not
available.

• The Main Window is not used for

VIDEO input signal display and the
Sub-Window is not used for PC input
signal display.

NOTE

• Touching

for approx. two

seconds in PinP display mode also
allows you to return to the single
display mode.

HD2441W_UM_EN.indd 24

4/14/2007 6:21:58 PM

Содержание FLEXSCAN HD2441W - SETUP





















































Результаты поиска

Содержание FLEXSCAN HD2441W - SETUP

Отзывы:

Eizo FLEXSCAN HD2441W - SETUP, Руководство пользователя, Страница: 26 / 52

Результаты поиска

Содержание FLEXSCAN HD2441W - SETUP

Отзывы: