Eizo FlexScan EV2785, Руководство пользователя

Страница: 9 / 42

●
Rear
6
7
8 9 10
11
12
14
13
15
16
6. Handle This handle is used for transportation.
7. Security lock slot Complies with Kensington’s MicroSaver security system.
8. Main power switch
Turns the main power on or off. : On, : Off
9. Power connector Connects the power cord.
10. Input signal connectors The following connectors are available on the monitor rear in order of left to
right.
HDMI connector (1)
HDMI connector (2)
DisplayPort connector
USB-C connector
11. Lock button Use this button to remove the monitor from the stand.
12. USB downstream port
(support for boost charging)
Connects to a peripheral USB device. ( page 23 )
13. USB downstream port Connects to a peripheral USB device.
14. Headphone jack Connects to headphones.
15. Cable holder Holds the monitor cables.
16. Stand
*2
Adjusts the height and angle (tilt, swivel, and rotation) of the monitor.
*2 An optional arm (or optional stand) can be attached by removing the stand section (see “6-1. Attaching the
Optional Arm” (page 31) ).
9
Chapter 1 Introduction