English
3. ScreenManager
21
3-3. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
[How To lock]
(1)
Switch off the monitor's power by the power button on the control panel.
(2)
Press on the Auto adjustment button while switching on the monitor's power.
[How To unlock]
(1)
Switch off the monitor's power by the power button on the control panel.
(2)
Hold down the Auto adjustment button once again and turn the power back
on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state
after a predetermined amount of time has lapsed. This function was created to reduce
afterimage characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1)
Select <Off Timer> in the ScreenManager <Others> menu.
(2)
Select “Enable” and press the right and left buttons to adjust the “On Period”
(1 to 23 hours).
[Off Timer System]
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode,
press the Power Button during the advance notice period. The monitor will continue to op-
erate for an additional 90 minutes.
Locked function
z
Adjustments and settings in the ScreenManager.
z
Auto Adjustment Button
Unlocked function
z
Brightness/ Contrast adjustments through the control buttons
z
Input Signal Selection Button
PC
Monitor
Power Indicator
On Period (1H - 23H)
Operation
Blue
Last 15 min. in “On period”
Advance Notice*
Blue Flashing
“On period” expired
Power Off
Light Off
