●
Checking the strength of the installation location
The weight of this product is approximately 71.7 kg. Check the withstand loads of the installation
location and fittings used.
●
Checking the installation environment
•
When mounting the monitor on a wall, pay attention to lighting equipment, sprinklers, and sensors
on the ceiling.
• To ensure performance and prevent malfunctions of the monitor, do not install it in the following
locations:
- Where the monitor may be subjected to strong vibrations and/or impacts
- Where dew tends to form as a result of air from an air conditioner or fluctuating temperatures
- Where water droplets may fall from an air conditioner installed above the monitor
- Near the source of a magnetic field, heat, steam, or greasy fumes
- Next to fluorescent lights or devices that produce electrical noise
• The operation button is located on the side of the product main unit. Install the product in a place
where you can operate the operation button.
●
Installing a fitting on the monitor main unit
Attention
•
Mounting fitting is not provided. Please prepare separately.
1. To prevent the surface of the LCD panel from being damaged, lay the monitor with its panel
surface facing down on a thick, soft cloth spread on a stable surface.
2.
Install the fitting on the monitor.
Align the 10 mounting holes in the monitor with those in the fitting, then secure the fitting using the screws
(recommended torque: 10 N·m to 12 N·m).
Installation example
Soft cloth
Mounting fitting
Screw M8 (10 pcs)
English
15
Chapter 2 Installation / Connection
