7
En
gli
sh
Connecting Cables
Attention
• Check that the monitor and the PC are powered off.
•
When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and vertical
scan frequency to those that are available for this monitor. Refer to the compatible resolution table before connecting
the PC.
• The touch panel does not function normally if multiple PCs are connected to the monitor.
Note
•
When connecting multiple PCs to the monitor, refer to the User’s Manual on the CD-ROM.
1.
Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DisplayPort
USB
DVI
D-Sub
AUDIO OUTPUT
DVI
D-Sub
DisplayPort
AUDIO OUTPUT
FD-C39 (supplied)
or
Digital connection (DVI)
Analog connection (D-Sub)
MD-C87 (supplied)
Stereo mini jack cable (supplied)
CD player, etc
PP200 (option)
Digital connection (DisplayPort)
USB cable MD-C93
*1
(supplied)
*1
Required when used as a touch panel monitor.
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
