Chapter 7 Reference
7-1. Attaching an Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our
web site for the corresponding optional arm (or optional stand).
www.eizoglobal.com
Attention
• When attaching an arm or stand, follow the instructions of their User's Manual.
•
When using another manufacturer's arm or stand, confirm the following in advance and select one conforming to
the VESA standard. Use the screws securing the unit and the stand.
- Clearance between screw holes: 100 mm × 100 mm
- Plate thickness: 2.6 mm
-
Must be strong enough to support weight of the monitor unit (excluding the stand) and attachments such as
cables.
• When using an arm or stand, attach it to meet the following tilt angles of the monitor.
- Up 60 degrees, down 45 degrees (horizontal display)
- Up 45 degrees, down 45 degrees (vertical display, 90 degrees clockwise)
• Connect the cables after attaching an arm or stand.
•
The monitor, arm, and stand are heavy. Dropping them may result in injury or equipment damage.
●
Attachment procedure
1.
To prevent damaging the panel surface, lay the monitor on a soft cloth spread
on a stable surface with the panel surface facing down.
2.
Remove the stand.
Prepare a screwdriver. Using a screwdriver, remove the screws (four) securing the unit and the stand.
3.
Attach the arm or stand to the monitor.
Fastening torque: 1.0 N·m to 1.4 N·m
28
Chapter 7 Reference
