8
Chapter 2 Advanced Adjustment / Setting
2-2. Individual Functions of Main Menu
●
3D
Setting in 3D mode.
Function
Setting range
Description
3D/2D Selection
3D
2D
Switches 3D/2D display.
Signal Format
SIMUL
TOP AND BOTTOM
SIDE BY SIDE
LINE BY LINE
Sets the signal format in 3D mode.
• “SIMUL”
Displays in 3D mode by inputting left-eye signals from DVI-D 1
(SDI 1) and right-eye signals from DVI-D 2 (SDI 2). Displays in
3D mode by inputting Dual-stream signals (SDI 1 (LEVEL B) or
SDI 2 (LEVEL B)).
• “TOP AND BOTTOM”
Displays in 3D mode by inputting signals in TOP AND BOTTOM.
• “SIDE BY SIDE”
Displays in 3D mode by inputting signals in SIDE BY SIDE.
• “LINE BY LINE”
Displays in 3D mode by inputting signals in LINE BY LINE.
Left/Right Swap
Off
On
Switches the displays of the left-eye signal and the right-eye signal.
H Parallax
-62 to 62
Adjusts horizontal offset of the left-eye signal and the right-eye
signal. If you do not experience a 3D effect, this may be improved by
adjusting the parallax.
V Parallax
-31 to 31
Adjusts vertical offset of the left-eye signal and the right-eye signal. If
you do not experience a 3D effect, this may be improved by adjusting
the parallax.
Attention
• The settings of “Signal Format”, “Left/Right Swap”, “H Parallax” and “V Parallax” cannot be changed in 2D
mode.
Note
• 3D mode indicator (
) is displayed on the upper left of the screen in 3D mode.
