16
Chapter 2 Advanced Adjustments / Settings
GPI Setup
Sets the functions assigned to each pin of the GPI terminals (GPI1 to GPI8).
Setting
Description
PIP
Switches between dual screen (P in P) and single screen.
POP
Switches between dual screen (P out P) and single screen.
Display Direction
Rotates or flips screen.
Display Direction
Rotates or flips the main screen.
Display Direction
Rotates or flips the subscreen.
Window Mode
Switches the setting values of “Window Config” - “Window Mode” in sequence.
Input VIDEO
Switches the main screen input signal to VIDEO.
Input S VIDEO
Switches the main screen input signal to S VIDEO.
Input RGB/YP
B
P
R
Switches the main screen input signal to RGB/YP
B
R
R
Input DVI-D 1
Switches the main screen input signal to DVI-D 1.
Input DVI-D 2
Switches the main screen input signal to DVI-D 2.
Input SDI
Switches the main screen input signal to SDI.
Input VIDEO
Switches the subscreen input signal to VIDEO.
Input S VIDEO
Switches the subscreen input signal to S VIDEO.
Input RGB/YP
B
P
R
Switches the subscreen input signal to RGB/YP
B
R
R
Input DVI-D 1
Switches the subscreen input signal to DVI-D 1.
Input DVI-D 2
Switches the subscreen input signal to DVI-D 2.
Input SDI
Switches the subscreen input signal to SDI.
Sync. Select RGB
Switches the setting values of “Input Config” - “Sync. Select RGB” in sequence.
Red Tally
Sets (red) displayed at the top center of the screen to On or Off.
Green Tally
Sets (green) displayed at the top center of the screen to On or Off.
WINDOW SELECT
Switches the screen performing the operation
Undef
Not set.
Notes
•
The GPI is an edge operation, without the exception of the “Red Tally” and “Green Tally”. Set pins from open
to the same potential as GND to process operations. Edge operations require a period of at least 200 ms,
with the same potential as GND. After the operation, cancel the equipotentiality with GND.
