9
Chapter 2 Advanced Adjustment / Setting
Function
Setting range
Description
Sync. Select (HD15)
Auto
Sync on Green
Sets the synchronization signal input method for the HD15
input terminal.
•
“Auto”
Automatically switches between HD/VD input and
SYNC on G. When HD/VD input and SYNC on G are
synchronous, HD/VD input is given priority.
•
“Sync on Green”
When HD/VD input and SYNC on G are synchronous,
select this to synchronize with SYNC on G
Analog
Adjustment
Auto Setup
-
Automatically adjusts “H Position”, “V Position”, and “Dot
Clock” when the PC signal is input.
H Position
0 to 300
To move screen left and right.
V Position
0 to 100
To move screen up and down.
Dot Clock
0 to 100
When a striped pattern is displayed, adjust so that noise
will decrease when the synchronous striped pattern (noise)
is produced.
Clock Phase
0 to 31
When inputting RGB signals and PC signals, adjust
for ease of viewing if bleeding or blurring of the screen
contour occurs.
Signal Format
4:3
Wide
Sets signal type for unidentifiable signals.
