29
Chapter 2 Adjusting Screens
2-5.
Configuring Moving Image Performance
This product is equipped with an overdrive function. This function reduces visible afterimages that appear in fast
moving images. If noise or afterimage is adversely noticeable when the “Overdrive” setting is set to “On”, change
the setting to “Off”.
Default setting: “Off”
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “Overdrive” from “Screen”, and press
.
3. Select “On” or “Off” with
or
.
4.
Press
to exit.
2-6. Specifying Color Space
The color space of the input signal can be specified. Set to other than “Auto” if this product cannot display correct
color.
Settings
Function
Auto
Identifies the color space of the input signal automatically.
YUV 4:2:2
Converts the color space of the input signal to a YUV 4:2:2 format.
YUV 4:4:4
Converts the color space of the input signal to a YUV 4:4:4 format.
RGB
Converts the color space of the input signal to an RGB format.
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “Color Space” from “Screen”, and press
.
3. Select “Auto”, “YUV 4:2:2”, “YUV 4:4:4”, or “RGB” with
or
.
4.
Press
to exit.
Attention
•
The setting is required when a DVI device is connected to the monitor (at the HDMI connector port) using the DVI-
HDMI conversion connector.
•
Even if “Auto” is set, correct color might not be displayed.
Note
•
The color space at the DVI input is converted to an RGB format.
• See
”2-7. Expanding Signal Output Range” (page 30)
to set the range of input signals.
